Level Meters Product List and Ranking from 17 Manufacturers, Suppliers and Companies

Level Gauge Radar Type Eclipse (Eclipse 706)

High-precision full measurement is possible with further evolved signal processing! No maintenance required and zero dead zone!

The "ECLIPSE 706 Series" is a guide wave level transmitter that enables measurement at both the base and tip using unique signal analysis technology. The new signal processing Echo Curve divides the detected liquid level and the originally unmeasurable zone into negative and positive areas based on a threshold on the horizontal axis, eliminating overlap in the sensitivity range. By capturing the level detection signal in the negative zone and recognizing the signal from the probe tip or base in the positive zone, analysis can be performed without signal overlap. We also offer the "705 Sanitary Series" and "R86 RADAR," which are compatible with CIP/SIP cleaning. 【Features】 ■ Acquired explosion-proof certification in Japan ■ Equipped with a preliminary diagnostic function ■ Not affected by changes in temperature or process that cause variations in liquid density ■ Stable detection possible even when there are adherent substances on the probe ■ Ability to measure the entire volume down to the bottom of the tank due to the absence of dead zones on the rod *For more details, please contact us via [iPros Manufacturing] or [special site].

Company：ジャパンマシナリー
Price：Other

Measurement and Inspection
Water quality/pH measuring device
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Interface Level Measurement] Ultrasonic Interface Level Meter HL2100

It measures the distance in water and liquids by utilizing the propagation of ultrasonic signals in the liquid. It can also measure in opaque liquids.

Ultrasound has the property of reflecting at the boundaries of different media. By emitting ultrasound from a sensor underwater and calculating the time taken for it to reflect and be received at the interface, we can determine the sedimentation state. Since measurements are taken non-contact with the sediment, it is possible to measure the interface of opaque treated water or the interface within deep tanks without lowering the sensor to the target sediment. ■ A wide range of distances from 0.2 to 10 meters can be measured from the sensor emission surface. ■ One unit can measure at two locations. (Standard equipment: one sensor) ■ Because it uses ultrasound, measurements can be taken without the influence of transparency, color, or day/night conditions. ■ The interface is measured based on computational processing that assumes changes in the quality of supernatant water and changes in the concentration of accumulated sludge, so there is no need to change set values or readjust based on the condition of the equipment. ■ Both the transducer and sensor have no moving parts, allowing for stable measurements over long periods.

Company：本多電子産業機器事業部
Price：500,000 yen-1 million yen

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerial Level Measurement - Ultrasonic Level Meter HD1200

Achieving even more stable distance measurement with the incorporation of DSP.

■ Realizes a unique level detection algorithm using DSP, eliminating the effects of noise and unwanted reflections, enabling stable measurements. ■ Two sensors can be connected to a single unit. Different types of sensors can be selected, allowing measurements at two locations with different ranges using one unit. ■ Logs recorded on micro SD TM. ■ Standard equipped with a siphon-type flow measurement.

Company：本多電子産業機器事業部
Price：Other

Non-destructive testing
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerial Level Measurement: Ultrasonic Level Meter HD353-A

Low-cost model of a DSP level meter featuring a graphic LCD in a compact body.

A compact and lightweight ultrasonic level gauge that integrates the sensor and control unit. It features a graphic LCD display that allows for the visualization of the A-mode waveform, which is effective during installation and maintenance. The mask function helps to avoid the effects of unwanted reflections. ■ Displays ultrasonic reflection waveforms (A-mode) on the graphic LCD Improved data readability and enhanced operability ■ Capable of measuring by applying mask processing to obstacles within the sensor's directional angle ■ Compact and lightweight body that integrates the sensor and control unit ■ Body made of chemical-resistant resin (PP) ■ Communication functions enable remote operation via RS-485 (MODBUS protocol), 4-20 mA current output, and alarm output contacts.

Company：本多電子産業機器事業部
Price：10,000 yen-100,000 yen

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Weighted Level Meter for Powder and Granular Material Measurement 'Sounding V'

Accurately measure the storage levels in powder silos and tanks! Remote display is also possible!

This is a compact type that pursues low cost and miniaturization. By supplying AC 100V directly to the main unit, all control circuits are housed within the unit, allowing for manual measurement commands and automatic operation with a built-in timer, outputting level signals according to the set level. With the cost of installing several level switches, continuous level output is possible, making it suitable for inventory management of various powders, including grains and feed. 【Features】 ● Wire rope diameter: 2 mm ● Automatic control operation by microcontroller, requiring no adjustments ● Capable of outputting measurement values as 4-20 mA signals from the main unit alone ● Easy installation by simply setting it on a flange equivalent to JIS 10K 4B ● Major components are made of FRP resin molding, achieving excellent durability *For more details, please click on the related link or download the catalog.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Weighted Level Meter for Powder and Granular Material Measurement 'Sounding M's'

A sounding type level meter capable of measuring not only powder and bulk materials but also suspended solids in liquids.

This is a standard type with enhanced performance and functionality. The wiring consists only of a 4-core cable, significantly reducing installation costs. Simple settings can be made using the controller, with no complicated adjustments required. The unit has been further developed to accommodate a wide range of applications, meeting all requests for high temperature, high pressure, low temperature, and explosion-proof specifications. As a general-purpose sounding device, we guarantee affordable and stable measurements. 【Features】 ● Adoption of a unique control system (patent H5-12648) in the control system ● Significant reduction in installation wiring costs ● All necessary functions are standardly equipped in the controller ● Freely selectable "separate controller placement" or "internal storage type" ● Measurement depth standardized up to 40m, with freely selectable span settings ● Factory pressure-resistant explosion-proof models are also available in a series, with options for high temperature, corrosion resistance, and high pressure specifications *For more details, please click on the related link or download the catalog.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Delivery Example] Microwave Level Meter with Drive Unit

Introduction to customization tailored to your specifications.

We would like to install a microwave level gauge to measure the level inside the tank, but we have customized it to accommodate requests for inserting measuring materials and other measuring devices from the installation location. We have customized it so that the level gauge can be retracted when not in use by combining it with a drive unit. For more details, please contact us.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Radar Microwave Level Meter for Mobile Trippers

Monitor multiple bunker levels from a mobile tripper! Achieve stable measurements unaffected by dust and steam!

We would like to introduce a case where the radar-type microwave level gauge 'MWLM-PR26H7S' handled by Matsushima Majortech was implemented in a mobile tripper. In the case of laser or ultrasonic types, there was a risk of erroneous measurements due to reflections from dust and steam, and the influence of dust and steam could cause sound waves to attenuate, leading to unstable measurements. By introducing this microwave product, which has the property of being able to penetrate without reflections (noise) from dust and steam, we were able to monitor multiple bunker levels from the mobile tripper. [Case Study] ■ Issues - Risk of erroneous measurements due to reflections from dust and steam - Existing level gauges may become unstable due to the influence of dust and steam ■ Product Introduced - Radar-type microwave level gauge 'MWLM-PR26H7S' ■ Effects - Enabled monitoring of multiple bunker levels from the mobile tripper *For more details, please refer to the PDF document or feel free to contact us.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
others
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Radar-type Microwave Level Gauge for Measuring Hot Spring Water Tanks

Measurement even with poor visibility due to steam! Achieving stable measurements in environments where steam and dust are generated.

We would like to introduce a case where the radar-type microwave level gauge 'MWLM-PR26H3F' handled by Matsushima Majatech Co., Ltd. was introduced into a hot spring water tank. The existing ultrasonic level gauge was experiencing measurement errors due to the influence of steam. After installing our product, the measurement errors were eliminated, which was well received. 【Case Study】 ■Challenge - The existing ultrasonic level gauge was experiencing measurement errors due to the influence of steam. ■Product Introduced - Radar-type microwave level gauge 'MWLM-PR26H3F' ■Effect - Measurement errors were eliminated. *For more details, please refer to the PDF document or feel free to contact us.

Company：マツシマメジャテック
Price：Other

others
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Condensation and Oil Droplet Countermeasure Liquid Radar Microwave Level Gauge

Antenna cap for preventing condensation and oil droplets in liquid tanks and oil tanks! Enables stable measurements.

The radar-type microwave level gauge 'MWLM-PR26C1G' handled by Matsushima Majatech is equipped with a "PTFE antenna cap" sensor, and we will introduce a case where it was implemented in an animal fat tank. In some environments, condensation and oil droplets may occur. By using the "antenna cap," it prevents the entry of condensation and oil droplets into the antenna, allowing for stable measurements. 【Case Study】 ■Challenges - Occurrence of condensation and oil droplets ■Product Implemented - Radar-type microwave level gauge 'MWLM-PR26C1G' (PTFE antenna cap) ■Effects - Prevents the entry of condensation and oil droplets into the antenna, enabling stable measurements *For more details, please refer to the PDF document or feel free to contact us.

Company：マツシマメジャテック
Price：Other

others
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Biomass Radar-type Microwave Level Meter for Chicken Manure Silos

Even in silos with heavy material adhesion, effective adhesion prevention measures allow for precise measurement! Cleaning tasks can be reduced!

We would like to introduce a case where the microwave level gauge 'MWLM-PR26H7S' handled by Matsushima Majatech was implemented in a biomass plant chicken manure silo. With the existing level gauge, there was constant accumulation of deposits even with a cleaning frequency of once a month. However, after switching to this product, the inside of the antenna three months later had almost no deposits even without cleaning. By utilizing a PTFE-coated antenna, this product reduces the accumulation of deposits and takes advantage of water droplets from condensation to wash away the deposits, thereby reducing cleaning work. [Case Study] ■ Issues - The existing level gauge had deposits even with a cleaning frequency of once a month. ■ Implemented Product - Microwave level gauge 'MWLM-PR26H7S' ■ Effects - Even without cleaning, water droplets were washing away the deposits.

Company：マツシマメジャテック
Price：Other

others
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Corrosion Gas Countermeasure Measuring from the Outside of the Tank - Microwave Level Meter

For chemical tanks that generate corrosive gases, the level is measured from the outside of the resin tank!

We would like to introduce a case study of the radar-type microwave level gauge handled by Matsushima Majortech. In the chemical tank of a factory's wastewater treatment facility, there was a problem where the level gauge corroded due to the influence of chemicals (such as gases). To address this, we utilized the characteristics of microwaves that can penetrate materials with low dielectric constants, allowing the introduction of our product to measure from the outside of the tank. 【Case Study】 ■Issue - The level gauge corrodes due to the influence of chemicals ■Product Introduced - Radar-type microwave level gauge 'MWLM-PR26H**' ■Effect - Measurement can now be conducted from the outside of the tank *For more details, please refer to the PDF document or feel free to contact us.

Company：マツシマメジャテック
Price：Other

others
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Radar-type Microwave Level Gauge for Wood Chip Chutes

Even if there is only a mounting location on the side wall, measurements can be taken! Customized with a mounting frame tailored to the equipment!!

We would like to introduce a case study of the radar-type microwave level gauge 'MWLM-PR26H7S' handled by Matsushima Majortech. There was a problem where there was no installation space above the wood chip chute, making measurement impossible. We fulfilled the request to somehow conduct measurements inside the chute. By installing the level gauge on the side wall and mounting it so that the product faces vertically towards the raw material surface, stable measurements could now be taken from the side. 【Case Study】 ■Challenges - There was no installation space above the wood chip chute, making measurement impossible. ■Product Introduced - Radar-type microwave level gauge 'MWLM-PR26H7S' ■Effects - Measurements can now be taken from the side.

Company：マツシマメジャテック
Price：Other

others
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Radar Microwave Level Gauge for Contamination Prevention in Food Factories

Monitor the remaining raw materials in the tank! Eliminate leftover cargo to avoid quality defects and quality incidents!

We would like to introduce a case study of the radar-type microwave level gauge 'MWLM-PR26H series' handled by Matsushima Majatech. In food manufacturing, the mixing of fresh ingredients with old ones can lead to quality issues. The residual material in the hopper, which causes this problem, cannot be detected by the lower limit switch, so we decided to measure it using a microwave level gauge. 【Case Study】 ■Challenge To prevent contamination, we were visually checking the residual material in the hopper every time we replaced the ingredients. ■Product Introduced Radar-type microwave level gauge 'MWLM-PR26H3S' ■Effect We were able to measure the residual material with the microwave level gauge, eliminating the need for visual confirmation. *For more details, please refer to the PDF document or feel free to contact us.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
others
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Application Example] Application proposal for mining equipment "Radar-type microwave level gauge"

It is unaffected by harsh environments such as dust and steam! A level gauge that responds to a sudden 10m level change in 2 seconds.

The radar-type microwave level gauge has excellent tracking capability and is suitable for level control in shafts and detecting blockages in primary crushers. Additionally, because microwaves can penetrate dust and vapor, there is no risk of mistakenly measuring dust or vapor. 【Features】 ■ Improved tracking capability ■ Not affected by dust or vapor ■ Not affected by wind, temperature, or gas *For more details, please refer to the PDF materials or feel free to contact us.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study Collection] Microwave Level Measurement for Factory and Plant Applications

Numerous examples of level measurement achieved in harsh environments such as high temperatures, foaming liquid surfaces, condensation, oil droplets, and corrosive gases are featured!

Level measurement is essential in factories and plants, but there are still many challenges in measuring levels under various harsh conditions. If these challenges are not resolved, it can lead to inaccurate measurements and equipment damage. Matsushima Majatech, as a manufacturer of level measurement devices, has addressed various measurement challenges, including those related to powders. This document is a collection of case studies summarizing examples of the implementation of radar microwave level gauges handled by Matsushima Majatech Co., Ltd. It includes examples such as the "Wood Chip Chute Implementation Case," which can measure even when there is only wall space available, as well as the "Chicken Manure Silo Implementation Case," which prevents adhesion and reduces cleaning work, and the "Mobile Tripper Implementation Case." Each case highlights key points and is introduced using photos and illustrations. [Featured Cases (Excerpt)] ■ Wood Chip Chute Implementation Case ■ Chicken Manure Silo Implementation Case ■ Mobile Tripper Implementation Case ■ Mining Plant Implementation Case ■ Beverage Plant Implementation Case *For more details, please refer to the PDF document or feel free to contact us.

Company：マツシマメジャテック
Price：Other

Other analytical equipment
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Improvement of Water Quality of Treated Water through Level Monitoring

Level monitoring is effective for improving the environment and reducing costs in thickener equipment!

■Challenges of Thickener Equipment We often hear from customers that they want to monitor the concentrated sludge that accumulates at the bottom of the thickener. However, since the sludge accumulates in the liquid, they are troubled by not knowing how to monitor it or what kind of measuring instruments to use... If the accumulated sludge cannot be measured... ● The quality of the treated water deteriorates, making reuse difficult. ● The rake experiences increased load and wears out. We want to find a way to solve these challenges! The solution to such concerns is the "Sounding Level Meter (Weight-Type Level Meter)." The sounding level meter (Sounding M's) suspends a detection weight at the end of a wire, and by moving the weight up and down, it detects the distance to the accumulated material. The weight reliably detects the accumulated sludge without being affected by the resistance of the water.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radar-type millimeter wave level gauge with a maximum measurement distance of 120m.

Thoroughly pursuing customer usability! A 79GHz band millimeter-wave level meter equipped with on-site experience and proven results.

The domestically produced radar-type millimeter-wave level gauge (79GHz band) boasts "maximum measurement distance of 120m," "radiation angle of 4°," and "dead zone of 0.3m," offering world-class performance. It is a level sensor capable of stable measurements from large silos to small tanks. Based on field experience and numerous achievements, we thoroughly pursue user-friendliness for our customers: - Equipped with Bluetooth functionality, making adjustments easy with a smartphone or tablet. No need to start a PC or connect dedicated cables; just touch your smartphone or tablet! - Easy even after cleaning! The azimuth angle detection function allows for smooth reinstallation. Fine adjustments to the installation position that occur after inspections or updates can be quickly aligned with recorded data! - Alerts for troubles caused by adhesion or forgotten inspection dates. We notify you with alarm outputs to prevent issues such as equipment shutdown due to overflow from material adhesion or forgetting important inspection tasks due to busy work! We monitor storage levels in tanks, silos, pits, furnaces, rivers, dams, and more, both indoors and outdoors! For more details, please click on the related link or download the catalog.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Measurement and analysis equipment leasing and rental
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Positive list compliant radar millimeter wave level gauge

Safety and Security Positive List Compliant Products

The positive list system is an important regulatory approach that protects product quality and safety, benefiting both consumers and businesses. Understanding what is permitted and what is not in the food industry and manufacturing is a crucial step in enhancing product reliability and ensuring safety. Radar millimeter-wave level gauges are used to monitor the storage levels of tanks containing food raw materials and products, contributing to improvements in productivity, labor-saving, and quality enhancement. Of course, these level gauges comply with the positive list system, allowing customers to use them with confidence in their facilities. For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Level Monitoring Without Drilling Holes in the Tank

Reduce initial costs without drilling work!

There was a desire to introduce a level gauge to the wastewater tank at the semiconductor factory, but there were concerns from other companies that installation would require drilling a hole in the tank, which was troubling. <Challenges Before Introduction> 1) If a hole is drilled in the tank, it will need to be emptied, and the costs for drilling work and cleaning will accumulate, in addition to having to stop production. 2) It is unclear whether the existing level gauge is functioning properly, so we have to go to the site and check visually. We want to accurately grasp the remaining amount. For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Monitoring the Level of Collected Dust

Stable level monitoring without relying on the experience points of veterans.

In the automobile recycling factory, the dust generated during the crushing of cars is collected by a dust collector and then pumped to a container, with the level monitoring of the container relying on the experience of veteran workers. Therefore, we would like to introduce a case where we solved this issue by implementing a radar-type millimeter-wave level gauge. <Challenges Before Implementation> 1) When there is a sudden increase in the pumping volume, even veteran workers may misjudge the timing, leading to an overflow of the set quantity. 2) We want to enable even young workers to switch the containers at the appropriate timing. For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Hydroelectric Power Plant Water Intake Level Monitoring

Water level monitoring for the safety of the lower reaches.

In waterway power generation, water is taken from upstream rivers and sent to the power station through a waterway. If the water intake is low, the downstream area can experience flooding, which is dangerous, so monitoring water levels is very important. This time, we will introduce a case where millimeter-wave level gauges were implemented for monitoring water levels in the waterway of the waterway power generation and in the river, achieving stable power generation and safety in the downstream area. <Points for Selecting Millimeter-Wave Level Gauges!> 1) With millimeter-wave level gauges, the radiation angle is narrow, allowing avoidance of interference with structures even in confined spaces. 2) Millimeter-wave level gauges can provide stable measurements even at long distances of over 20 meters. For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Level Measurement of Electric Furnace Bath Surface

Safety measures for the work environment! Avoid dangerous tasks!

This is an introduction to a case where a millimeter-wave level meter was introduced to automate the measurement of the molten metal surface temperature, which is one of the tasks performed manually in the high-temperature environment of an electric furnace. <Challenges Before Introduction> Measuring the molten metal surface temperature of an electric furnace close to 1500°C is dangerous as it is done manually from the edge of the furnace. We want to utilize robots, but instructions on the depth for inserting the thermometer are necessary. For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other measuring instruments
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Reducing Unnecessary Tasks! Radar Microwave Level Meter

Nationwide Cement Service Stations Reduce Unnecessary Work!

Utilizing microwave level measurement, we solved issues such as inventory discrepancies and maintenance burdens at large silos in cement service stations nationwide. [Challenges] - Contact-type level gauges require cumbersome maintenance - Level switches cause discrepancies in inventory, making precise management of receiving and dispatching difficult For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other analytical equipment
Surveying
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Microwave Level Measurement and Wireless Management System

Zero daily measurement work!

Customer Information Delivery Destination: Cement Service Station Installed Equipment: Microwave Level Meter + Wireless Monitoring System Results: Improved Safety and Reduced Work Time Challenges Before Implementation Every day, we had to climb the silo and perform measurement work at height. It was a time-consuming task, and we also had to pay attention to safety. For more details, please refer to the related link URL.

Company：マツシマメジャテック
Price：Other

Other analytical equipment
Surveying
Other measuring instruments
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low Frequency Sound Level Meter NA-17 Rental

The frequency range can be selected from 1 to 50 Hz and 1 to 1,000 Hz.

The Low Frequency Sound Level Meter NA-17 is a level meter designed to measure low frequency sounds, referred to as low frequency noise and low frequency air vibrations. It is based on the concept proposed by Dr. Yasuo Tokita of the Kobayashi Institute of Physical Science, which considers the frequency range from 1 to 50 Hz as the low frequency sound domain. It features a flat frequency response for indicating the physical characteristics within this range and a frequency response for obtaining evaluations corresponding to psychological effects. 【Features】 ○ Level handling is done using 20log10P/P0, the same as in sound level meters. ○ The frequency range for low frequency sound is from 1 Hz to 50 Hz. For more details, please contact us.

Company：レックス
Price：Other

Vibration and Sound Level Meter
Measurement and analysis equipment leasing and rental
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vibration Level Meter TYPE 3233

Due to its small size and lightweight, it demonstrates mobility in all measurement sites.

The vibration level meter TYPE 3233 complies with the Measurement Law JIS C 1510-1955. By combining it with TYPE 7833, it can simultaneously measure vibration levels and vibration acceleration levels in three directions: X, Y, and Z for ground, floor, and seating. The measurement and calculation items include vibration level Lv considering sensory characteristics, physical quantity vibration acceleration level Lva, power average Leq, maximum value Lmax, minimum value Lmin, and time-weighted level Lx, which are instantaneously displayed in digital form on the LCD screen. For more details, please contact us.

Company：レックス測定キューブ
Price：Other

Dam construction
Other civil engineering works
Vibration and Sound Level Meter
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrasonic level gauge

A wide variety of sensors tailored for different applications! Equipped with a microprocessor for unique digital signal processing.

We would like to introduce our "Ultrasonic Level Meter." This device is equipped with three functions: level measurement, volume measurement inside tanks, and flow measurement using the weir method, all in one unit. Its plug-in structure allows for cost reduction in multiple tank applications. The ultrasonic level meter is divided into "liquid" and "powder" types, and we offer products tailored to various applications. 【Features】 ■ Equipped with a microprocessor for unique digital signal processing ■ Minimum ultrasonic beam angle of 5° (2.5° on each side) ensures accurate measurement without the influence of diffuse reflection ■ Three functions in one unit: level measurement, volume measurement inside tanks, and flow measurement using the weir method ■ Remote operation and information verification possible via HART line using Eview software *For more details, please feel free to contact us.

Company：ノダキ本社
Price：Other

Measurement and Inspection
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low Frequency Sound Level Meter "NA-18A" [Rental]

This is a low-frequency sound level meter that enables real-time analysis of 1/3 octave bands while measuring the G characteristic sound pressure level.

It can measure low-frequency sounds (1 to 500 Hz). It can measure low frequencies (1 to 100 Hz) that are difficult for humans to hear (or inaudible). 【Features】 - Equipped with G-weighting frequency characteristics and real-time analysis function for 1/3 octave bands. - Simultaneously measures low-frequency sound pressure levels (1 Hz to 100 Hz), G-weighted sound pressure levels, and 1/3 octave band levels (FLAT). - G-weighted frequency characteristics, RMS detection circuits, and 1/3 octave band filters utilize digital processing via DSP. - Data can be transferred to a computer via serial communication, allowing for editing in spreadsheet software.

Company：ソーキ
Price：Other

Vibration and Sound Level Meter
Level Meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vibration Level Meter VM-55

Simultaneous measurement of vibration level and vibration acceleration level is possible.

The VM-55 is a measuring instrument capable of simultaneous measurement of vibration level and vibration acceleration level. It consists of the main unit and an included three-direction vibration pickup (PV-83C), allowing for the simultaneous measurement of instantaneous values, time-weighted levels, time-averaged levels, maximum and minimum values in three directions. It complies with the standards "JIS C 1510:1995" and "JIS C 1517:2014," as well as the new standards that came into effect on November 1, 2015. Measurement results are recorded in the internal memory of the main unit or on a large-capacity SD card (up to 32GB). By installing an optional program, it can also support long-term continuous data automatic recording to the SD card, comparator output functions, and waveform recording. The main unit achieves a dustproof and waterproof performance of IP54.

Company：姫島陽介株式会社アスコム
Price：Other

Vibration and Sound Level Meter
Level Meters

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Level Meters Product List and Ranking from 17 Manufacturers, Suppliers and Companies | IPROS

Level Meters Manufacturer, Suppliers and Company Rankings

Level Meters Product ranking